H-BOX 308 Underfloor Heating Wiring Center

Menred underfloor wiring center box H-Box 308 is designed to simplify the wiring of central heating installations，220V/230V power supported and connecting signals wire from heating thermostats for underfloor heating system. It offers a safe and convenient way to connect electro-thermal actuators to the room thermostats in the hydraulic floor heating system, the thermostats with potential-free linkage is fine for the heat sources, like boiler and heat pump.

Inquiry Now

Description

Menred underfloor heating wiring center H-Box 308 is designed to simplify the wiring of central heating installations. It offers a safe and convenient way to connect electro-thermal actuators to the room thermostats in the hydraulic floor heating system, the thermostats with potential-free linkage is fine for the heat sources, like boiler and heat pump.

This flame-retardant plastic box features a spacious design with simplifies installations, which can make circuit checking easier. Mould box complete with lid, ideal for central heating control wiring.

H-Box 308 key features

> Apply to the room constant temperature control system

> Connecting the valves and room thermostats for central control

> 8 circuits for room thermostat individual control

> 2 potential-free output

> Adjustable linkage signal delay time

> Safety, reliable, standard and easy to maintenance

Quality control

1. dust free workshop

2. 100% detection

Notice

1. H-Box central heating wiring center must be installed by the professional plumbing & heating company

2. When install by non-professional without warranty

Specification

Voltage	AC230C±15%
Frequency	50Hz/60Hz
Current max	4A
Linkage interface	normal open potential-free contact switch
Adjusted delay time	0 min, 1 min, 3 min, 5 min
Circuit numbers	8 circuits
Protection class	IP 40
Ambient temperature	-5-50℃
Humidity	<95% RH

Data download

Menred H-BOX308 Underfloor Heating Wiring Center Box

FAQs

what does a wiring centre do? what does a wiring centre do?

Wiring centre is suitable for water underfloor heating systems, which is designed to be complete wiring solution for underfloor heating and D.H.W control. The wiring centre for the thermostats and actuators are wired together, including the outputs of gas boiler and water pump, which is convenient for centralised maintenance.

Do I need a wiring centre for underfloor heating ? Do I need a wiring centre for underfloor heating ?

It is recommended to install a wiring junction box centre for the unferfloor heating system.Wiring centre is suitable for water underfloor heating systems, which is designed to be complete wiring solution for underfloor heating and D.H.W control. The wiring centre for the thermostats and actuators are wired together, including the outputs of gas boiler and water pump, which is convenient for centralised maintenance.