MENRED CM20 thermal actuator is used in radiant heating and cooling systems, including underfloor heating ,radiator panles and air conditioning valves, in these systems, thermal actuators controls the flow of hot or cold water through the pipes or radiators.
Electrothermal actuator for manifold branch valves, small valves, dynamically balanced valves, built-in low-power wax element, driven by PTC heating, for the control of the valve flow of the electrically driven part. This product with pin design, factory to keep the valve open, the use of the need to pull out of the pin, running without noise, with spring reset function.
MENRED SEH35 thermostatic actuator apply to temperature control, fluid mixing center and freeze protection, as a valve and manifolds actuator to open or close based on a temperature set point. SEH35 thermal actuator is available to 24V and 230V, wax-based makes the actuator performance better, that result actuator as a star product of menred, with annual sales of over million.
SEH50 electro thermal actuator can be used with electrical on/off-controls to activate several types of valves and floor heating manifolds. The actuator is made for either 24V or 230V supply in normally closed.
TM30.23 electro thermal actuator can be used in the floor heating manifolds, small valves, and motorized balance valves. It’s noiseless when working. And the screw thread is M30*1.5mm universal type.
SEA23 series electric actuator is used in conjunction with a valve to control the flow of hot water or/and cold water in floor heating systems or air-conditioning systems.
VSI46 valve is assembled with an electric or electro-thermal actuator used in ventilation and air-conditioning systems fan coil unit control.
VEI46 valve is assembled with an electric or electro-thermal actuator used in ventilation and air-conditioning systems fan coil unit control.
Economy Park HQs, Yueqing City, China.
Weisswasser Germany
Lingkun Island,Wenzhou City,Zhejiang China.
Nanhu District, Jiaxing City, Zhejiang China.
Deutsch
中文