Because it controls the flow and distribution of water from the heat source( for example boiler, heat pump) to each underfloor heating zone. It feeds the warm water to heating pipes from the boiler or heat pump. ​A high quality manifolds is the most important component of underfloor heating system, which is individual control the different zone of heating system. It is recommended to be installed and used together with smart thermostat and actuators for automatic control to achieve the purpose of energy saving.

Underfloor heating manifold controls the flow and distribution of water from a heat source (for example, a boiler or heat pump) to each zone. It feeds the warm water to heating pipes from the boiler or heat pump. An underfloor heating manifold is the main part of the underfloor heating system that controls the individual zones of heating. It is recommended to be installed and used together with smart thermostat and actuators for automatic control to achieve the purpose of energy saving.

When installing the floor heating manifold, if there is no equipment room, the most suitable place is under the cabinet in the kitchen, and the second is under the basin in the bathroom. In this way, if there is a leak, it can be drained quickly. Regarding the selectivity of the two positions, generally the manifold is placed in the centre of each house, which has the following advantages: 1. When installed in the middle of the house, it can effectively save heating pipe materials; 2. With fewer pipes, there will be less water storage, and the resistance will be reduced, so the wall-hung boiler will operate more efficiently; 3. Placed in the middle position, heat to each room is a little more balanced.

In order to optimize energy efficiency for underfloor heating systems, we menred recommend that they operate at temperatures ranging from 35°C - 50°C

The room thermostat should be installed in a place that is easy to operate and cover the average temperature, place(such as living room, bedroom etc.) can avoid the direct sunlight, cold and heat source.

The room thermostat should be installed in a place that is easy to operate and cover the average temperature, place(such as living room, bedroom etc.) can avoid the direct sunlight, cold and heat source.

There are Gas boiler, ground source heat pump, air source heat pump and Electricity.

Water heating reply load 3A maximum power 600W, electric heating replay 16A Max. Power 3000W.

External sensor is for temperature limitation, not all underfloor heating need to install external sensor, we recommend that thermostat be euipped with an external sensor for electric heating to limit the overheating of the floor.

The temperature value can be calibrated by entering the advanced setting temperature calibration item.

The 3A thermostat can change the built-in temperature measurement method through advanced settings, and the 16A thermostat needs to check the whether external sensor is loosely connected or the sensor is damaged and needs to be replaced.

Menred wifi thermostat adopts Tuya App and alicloud IoT with a very stable operating system.